Creative Labs 500DAB MAN, DAB, TUNING, TUNING, TUNING, TUNING, Manual (MAN) scan, To manually scan in an ensemble

Manual (MAN) scan	This option enables you to manually scan for stations within the same ensemble, or for other
	ensembles in the Band III frequency (see “Glossary” on page A-1) that are broadcasted in your
	country or region.
	To manually scan in an ensemble
	1. Press and hold the TUNING knob for two seconds until the display below appears.
		Figure 3-7
	The radio begins scanning for ensembles randomly. When an ensemble is detected, its name
	and frequency appear, and if supported, a station from the ensemble plays.
	Ensemble		Frequency

Figure 3-8

If this ensemble is unsupported, no station is played. To scan in another ensemble, see the next section.

2.Press the TUNING knob to select the ensemble. The name of the current station playing appears.

Station name

Figure 3-9

3.To select another station, turn the TUNING knob.

4.To end manual scanning, press the TUNING knob. MAN is replaced by DAB on the LCD.

Using Your SoundWorks 500DAB 3-4