3

Using Your SoundWorks 500DAB

 

 

DAB Mode

Selecting DAB mode

You may need to perform an automatic full scan (see “Scanning stations in DAB mode” on page 3-2) if you are not able to receive any signal during the automatic quick scan.

Creative SoundWorks 500DAB goes into Standby mode when it is connected to the power outlet. The radio displays the radio mode it is in, as shown in Figure 3-1.

Figure 3-1

The radio displays the correct time in DAB and FM mode, after you perform a full scan in DAB mode for the first time. Your radio retrieves the time information from a DAB station.

1.When the radio is in Standby mode, press the STANDBY button. The display below appears. When doing this step for the first time, the radio automatically performs a quick scan in DAB mode, as shown in Figure 3-6.

Figure 3-2

2.If you are not in DAB mode, press the DAB/FM button. The display below appears, and the radio switches to DAB mode.

Figure 3-3

While in DAB mode, you can select FM mode at anytime using step 2 above.

3-1 Using Your SoundWorks 500DAB