4.Press the TUNING knob to go to the hours section. A display similar to Figure 4-4 appears. The current time is shown on the left of the LCD. The hour section of your alarm time flashes.

Figure 4-4

5.Repeat step 2.

6.Press the TUNING knob to go to the Alarm Type submenu.

7.Turn the TUNING knob to select BEEP or RADIO*.

8.Press the TUNING knob to confirm the selection.

The display similar to Figure 4-5 shows that the alarm has been activated.

Figure 4-5

•When the alarm is activated, an asterisk (*) appears on the display when the radio is broadcasting or in Standby mode.

Standby mode

Broadcast mode

Figure 4-6

• * RADIO works only in Standby mode.

Using Basic Functions 4-3