Tuning to stations
To manually scan in another ensemble
1.Follow step 1 on page
2.Turn the TUNING knob to go to another ensemble (see “Glossary” on page
Figure
3.Press the TUNING knob to select the new ensemble. A station from the ensemble plays.
4.To select another station, turn the TUNING knob. A display similar to Figure
Figure
5. To end manual scanning, press the TUNING knob. MAN is replaced by DAB on the LCD.
In Manual tune mode, you can only view the default INFO display.
To turn Autoselect mode on or off
Turn the TUNING knob to select a station, and then press and hold the TUNING knob for two seconds. A display similar to Figure
Figure