Adjusting the FM tuning step

To scan your FM stations using a different tuning step, follow the steps below:

1.Make sure you are in FM mode (see above).

2.Press and hold the INFO button until you see a display similar to Figure 3-16.

Scanning stations in FM mode

Autotune

Figure 3-16

3. Press the INFO button twice. A display similar to Figure 3-17 appears.

Figure 3-17

4.Press the TUNING knob to select the tuning step you want: 50 or 100 kHz.

5.To exit this display, press the INFO button.

To switch radio modes, see “Selecting DAB mode” on page 3-1. You can scan for FM stations manually, or use the automatic scanning (autotune) method below.

To do an autoscan

Press the AUTOTUNE button to scan for FM stations in ascending frequency. To scan in descending frequency, press and hold the AUTOTUNE button.

Automatic scanning for an FM station begins. Once a station is successfully scanned, a display similar to Figure 3-18 appears, and you hear the FM station’s broadcast.

Figure 3-18

Using Your SoundWorks 500DAB 3-8