Creative Labs 500DAB Using the AUX IN jack

Using the AUX IN jack

The software version may vary.

Use the 3.5 mm stereo-to-stereo cable provided to connect an external device, like your CD or MP3 player to the AUX IN jack on your radio. See “Your DAB/FM Radio” on page 1-1.

After connecting the external audio device, a display similar to Figure 4-12 appears. Radio broadcasts are disabled until the external device is disconnected from your radio. To listen to a radio station, disconnect the external audio device from your radio.

Figure 4-12

To increase the radio volume, you may need to adjust the volume on your external audio device.

4-6 Using Basic Functions

Contents

Safety & Regulatory Information IMPORTANT SAFETY INSTRUCTIONS Contents Your DAB/FM Radio Glossary Setting Up Your DAB/FM Radio General Specifications Introduction Package Contents Your DAB/FM Radio Page Setting Up Your DAB/FM Radio Using Your SoundWorks 500DAB DAB Mode Selecting DAB mode Scanning stations in DAB mode Quick scan To do a quick scan Manual (MAN) scan To manually scan in an ensemble MAN Tuning to stations Viewing additional information (INFO display) FM Mode Selecting FM mode Adjusting the FM tuning step Scanning stations in FM mode Selecting audio mode (Auto or Mono) Using Basic Functions Setting the sleep timer Checking the sleep timer setting Setting the alarm BEEP RADIO To activate the alarm To deactivate the alarm OFF To stop the alarm after it rings To turn on the Snooze function Resetting the radio Using the AUX IN jack Glossary Band III Frequencies Table 1: List of DAB Band III Frequencies General Specifications