Creda C161E manual Grill C261E, C361E, C365E and R365E, Setting the Grill

Models: C161E

1 52
Download 52 pages 40.88 Kb
Page 33
Image 33
Grill (C261E, C361E, C365E and R365E)

Grill (C261E, C361E, C365E and R365E)

Setting the Grill

Door in grilling position

Fig 1

Fig 2

CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS IN USE. CHILDREN SHOULD BE KEPT AWAY.

GRILLING SHOULD NEVER BE UNDERTAKEN WITH THE GRILL/TOP OVEN DOOR CLOSED.

The grill control is designed to provide variable heat control of either the twin grill elements on together or the single left hand grill element only, depending upon which direction the control knob is rotated. With the control rotated clockwise 1 through to 4 the twin elements will come on together. With the control turned anti-clock- wise 1 through to 4 and the single left hand element will come on only.

The control is Off at O.

Note: The grill will not operate unless the top oven control is in the OFF position.

Food which requires browning only should be placed under the hot grill, directly on the shelf in the first or second runner from the bottom of the oven, according to the depth of the dish.

Open the Grill door to the grilling position. i.e. fully.

With the grill door in the grilling position, heating the grill is achieved by turning the control clockwise to the desired ‘grill setting’ on the control panel.

Never: line the grill pan with aluminium foil.

Note: Preheat the grill at setting 4 for approximately 5 minutes. The grill pan is placed on the shelf or grill pan support/runner and should be correctly positioned under the grill element. Leave the control at 4 for toast, sealing and fast cooking of foods. For thicker foods requiring longer cooking, turn the switch to a lower setting after the initial sealing on both sides at 4. The thicker the food the lower the control should be set.

Grilling Procedure (Model C361E only)

1.Open the grill/top oven door fully.

2.Ensure that the Easy Glide™ Shelf is located in the correct position.

3.Preheat the grill, if necessary, with the Easy Glide™ Shelf pulled out (see Fig 1).

4.Locate the grill pan in the Easy Glide™ Shelf (see Fig 2) and push back under the element.

5.The grill pan should be withdrawn always using the grill pan handle to the stop position to turn or remove cooked food. (There is no need to remove the grill pan from the Easy Glide™ Shelf).

6.NEVER line the grill pan with aluminium foil as this may cause overheating of fat in the grill pan.

33

Page 33
Image 33
Creda C161E manual Grill C261E, C361E, C365E and R365E, Setting the Grill, Grilling Procedure Model C361E only