Creda C161E SolarPlus Grill C461E, Grilling, Should Never Be Undertaken, With The, Grill/Top

SolarPlus Grill (C461E)

CAUTION: ACCESSIBLE PARTS MAY BECOME HOT WHEN GRILL IS IN USE. CHILDREN SHOULD BE KEPT AWAY.

Your cooker is not fitted with a conventional type of grill. Creda have developed a Solarplus high speed grill which is designed to reduce your grilling times. It is quicker because it takes less time to warm up from cold. Conventional grills require 5 minutes preheat before food is placed beneath them, but for normal grilling the Solarplus grill can be used directly from cold without any pre-heat.

However, when toasting, optimum performance is achieved by preheating the grill for about 1 minute.

You will notice that the grill elements are protected by a wire mesh. This stops you from touching live parts, so under no circumstances should pointed objects be inserted into the mesh. During use the mesh may become soiled. Do not attempt to clean it while the grill is still on. Turn the cooker off at the control unit and wait until it has cooled down before cleaning.

Care must be taken to ensure the grill mesh is not distorted – do not store the grill pan handle on the grill pan grid when the rod shelf is in the top runner position.

There are two halves to the grill, one on the left and one on the right. You can choose to have both sides on or just the left side on. Turning the control knob clockwise, will switch both sides on. Turning it anti-clockwise, will only switch the left side on. The numbers indicate the heat setting, 4 is the hottest 1 the coolest.

IMPORTANT	GRILLING	SHOULD NEVER BE UNDERTAKEN	WITH THE
	GRILL/TOP	OVEN DOOR CLOSED. This will cause	overheating.
	The grill will not operate unless the top oven control is in the Off
	position.

Grilling Procedure

1.Open the grill/top oven door fully.

2.Ensure that the Easy Glide™ Shelf is located in the correct position (see ‘Guide to Grilling’).

3.Preheat the grill, if necessary, with the Easy Glide™ Shelf pulled out (see Fig 1).

4.Locate the grill pan in the Easy Glide™ Shelf (see Fig 2) and push back under the element.

5.The grill pan should be withdrawn always using the grill pan handle to the stop position to turn or remove cooked food.

(There is no need to remove the grill pan from the Easy Glide™ Shelf).

6.NEVER line the grill pan with aluminium foil as this may cause overheating of fat in the grill pan.

NOTE: To stop fat splashing onto the grill element mesh, it is important to use the anti-splash tray. Always clean the grill pan anti- splash tray and food grid after each use.

Fig 1 Fig 2

34