a specifications |
| CCTM owner’s manual | |||
|
|
|
|
|
|
CCTM Series |
|
|
| ||
|
|
| 4000 |
|
|
|
|
|
| ||
|
| Rated Power Bridge 4 ohms | 4,000 watts @ 1 kHz at <0.1% T.H.D. |
| |
|
| Rated Power (2 x 2 ohms) | 2,000 watts per channel @ 1 kHz <0.1% T.H.D. both channels driven |
| |
|
| Rated Power (2 x 4 ohms) | 1,350 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven |
| |
|
| Rated Power (2 x 8 ohms) | 800 watts per channel @ 1 kHz at <0.05% T.H.D. both channels driven |
| |
|
| Rated Power (1 x 2 ohms) | 2,550 watts @ 1 kHz at <0.1% T.H.D. |
| |
|
| Rated Power (1 x 4 ohms) | 1,600 watts @ 1 kHz at <0.05% T.H.D. |
| |
|
| Rated Power (1 x 8 ohms) | 900 watts @ 1 kHz at <0.05% T.H.D. |
| |
|
| Minimum Load Impedance | 2 ohms |
|
|
|
| Maximum RMS Voltage Swing | 93 volts |
|
|
|
| Frequency Response | 10 Hz - 100 kHz; +0, | ||
|
| Power Bandwidth | 10 Hz - 35 kHz; +0, | ||
|
|
|
| ||
|
| T.H.D. (2 x 2 ohms) | <0.2% @ 1,475 watts per channel from 20 Hz to 20 kHz |
| |
|
| T.H.D. (2 x 4 ohms) | <0.1% @ 1,150 watts per channel from 20 Hz to 20 kHz |
| |
|
| T.H.D. (2 x 8 ohms) | <0.1% @ 700 watts per channel from 20 Hz to 20 kHz |
| |
|
|
|
|
|
|
|
| Input CMRR | > |
|
|
|
| Voltage Gain | x40 (32 dB) x20 (26 dB) | ||
|
| Crosstalk | > | ||
|
| Hum and Noise | > | ||
|
|
|
|
|
|
|
| Slew Rate | > 15V/us |
|
|
|
| Damping Factor (8 ohms) | > 500:1 @ 20 Hz - 1 kHz |
| |
|
| Phase Response | +5 to - 15 degrees from 20 Hz to 20 kHz |
| |
|
| Input Sensitivity (x40) | 1.88 volts +/- 3% for 1 kHz, 4 ohm rated power, 1.62 volts +/- 3% for 1 kHz, 2 ohm rated |
| |
|
|
| power |
|
|
|
| Input Impedance | 15 k ohms, balanced |
|
|
|
| Current Draw @ 1/8 power | 1,825 watts @ 2 ohms, | 1,185 watts @ 4 ohms, 720 @ 8 ohms |
|
|
| Current Draw @ 1/3 power | 4,535 watts @ 2 ohms, | 2,975 watts @ 4 ohms, 1,835 watts @ 8 ohms |
|
|
|
|
|
| |
|
| Cooling | Two back panel temperature dependant variable speed 80 mm DC fans | ||
|
| Controls | 2 front panel attenuators, rear panel Mode switches | ||
|
|
|
| ||
|
| Indicator LEDs | 2 ACL™ (automatic clip limiting), 2 Signal presence, 2 Active status, 2 Temp |
| |
|
| Protection | Thermal, DC, |
| |
|
| Connectors | Combi XLR & 6.3 mm phone input, Speakon and |
| |
|
|
| amp IEC mains connector |
| |
|
|
|
|
| |
|
| Construction | 16 ga. steel with cast front panel | ||
|
| Dimensions | 88.9 mm x 482.6 mm x 377.8 mm + 31.8 mm for rear support ears and connectors | ||
|
|
| (3.5" x 19" x 14.875" + 1.25") | ||
|
| Net Weight | 19.64 kg (43.3 lbs.) |
|
|
|
| Gross Weight | 20.8 kg.(45.8 lbs.) |
|
|
All power measurements made at 120 VAC, power transformer cold. 2 ohm power is time limited by magnetic circuit breaker.