IMPORTANT UNPACKING INSTRUCTIONS
This package contains a Cuisinart® Premier Series
Work bowl, work bowl cover, large and small push- ers, dough blade, metal chopping/mixing blade, slic- ing disc, shredding disc, detachable disc stem for discs, spatula,
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instruc- tions.
1.Place the box on a low table or on the floor next to the kitchen counter or table where you intend to keep the food processor. Be sure the box is right side up.
2.Remove the cardboard insert. You will see a rectangular block of plastic foam that holds the processor parts, each fitted into a cavity in the foam.
3.The Detachable Disc Stem for the discs (A) sits in a cavity in one corner of the foam block. Remove this first.
4.The Pusher Assembly, with large and small pushers, (B) sits in the adjacent cavity. Remove this next.
5.The Dough Blade (C) rests in a cavity on the opposite side of the foam block. Remove it from the foam.
6.The plastic Spatula (D) is on one long side of the foam block. Remove it next.
7.The Slicing Disc (E) is on the edge of one of the long sides of the foam block; the Shredding Disc (F) is on the other side. Slide them out WITH GREAT CARE; THE BLADES ARE VERY SHARP.
8.Lift out the DVD from its space on the foam block.
9.Lift out the foam block.
10.Remove the instruc- tion/recipe book.
11.The housing base with work bowl, metal blade and cover are at the bottom of the box. The metal blade is loose in the work bowl beneath a foam insert. Do not reach into feed tube. Do not turn over work bowl without first removing metal blade. Remove work bowl cover by turning it clockwise and lifting.
12.Remove the base and bowl together by grasp- ing the plastic bowl at the top with both hands and lifting the bowl straight up. Do not rotate the bowl clock- wise on the base. This will cause the bowl to separate from the base.
13.Place the food proces- sor on the counter or table. Remove foam cylinder insert from top of metal chopping blade. Read the
instructions thoroughly before using the machine.
14.Save the shipping car- tons and plastic foam blocks. You will find them very useful if you need to repack the processor for moving or other shipment.
Please watch the enclosed how-to DVD before using the food processor.
NOTE: Remember to return your completed product registration card with all information care- fully filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP.
2
