CPEx GX-333-X

CyberResearch® CPU Cards

Airflow Consideration

Although the SBC can operate without active cooling, it is still necessary to install the SBC card in a chassis with ventilation holes on the sides allowing airflow to travel through the heatsink surface. In a system with an individual power supply unit, the cooling fan of a power supply can also help generate airflow through the board surface.

Unpacking Precautions

Some components on the CPEx GX-333-X are very sensitive to static electric charges and can be damaged by a sudden rush of power. To protect it from unintended damage, be sure to follow these precautions:

zGround yourself to remove any static charge before touching your PCB. You can do so by using a grounded wrist strap at all times or by frequently touching any conducting materials that is connected to the ground.

zHandle your PCB by its edges. Do not touch IC chips, leads or circuitry if not necessary.

zDo not plug or unplug any connector or jumper while the power is on.

zDo not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from static discharge.

Memory Module

In addition to the onboard 256MB memory, another DDR 266MHz, 256MB or 512MB in size, 200- pin SODIMM module can be added.

44

©Copyright 2007 CyberResearch, Inc.