CPEx GX-333-X

CyberResearch® CPU Cards

The Boot Other Device option determines whether the SBC will use a second or third boot device if the first boot device is not found.

Î

Enabled

(DEFAULT) The system will look for second and third boot devices if

 

 

the first one is not found.

Î

Disabled

The system will not look for second and third boot device

 

 

if the first one is not found.

ÎSwap Floppy Drive [Disabled]

This option allows you to change floppy drive designation (drive A: or B:) without changing the physical cabling.

ÎBoot Up Floppy Seek [Enabled]

During the POST, BIOS will determine if the floppy disk drive installed has 40 or 80 tracks. 360K FDDs have 40 tracks while 760K, 1.2M and 1.44M FDDs all have 80 tracks

Î

Enabled

BIOS searches for a FDD to determine if it has 40 or 80

 

 

tracks. Note that BIOS cannot tell the difference between

 

Disabled (DEFAULT)

720K, 1.2M or 1.44M drives as they all have 80 tracks.

Î

BIOS will not search for the type of FDD drive by track

 

 

number. Note that there will not be any warning

 

 

message if the drive installed is 360K.

ÎBoot Up Numlock Status [On]

The Boot Up Numlock Status option allows you to determine the default state of the numeric keypad.

Î

Off

The keys on the keypad will be arrow keys

Î

On

(DEFAULT) The keys on the keypad will be number keys

ÎTypematic Rate Setting [Disabled]

Disabling the Typematic Rate Setting configuration option only allows one character to appear onto the screen if a key is continuously held down. In other words, the BIOS will only report the key is down. When this option is enabled, the BIOS will report as before, but it will then wait a moment, and, if the key is still down, it will begin to report that the key has been depressed repeatedly. Such a feature would be used to accelerate cursor movements with the arrow keys.

Î

Disabled (DEFAULT)

Disables the typematic rate

Î

Enabled

Enables the typematic rate

Îx Typematic Rate (Chars/sec) [6]

The Typematic Rate can only be configured if the Typematic Rate Setting is Enabled. The Typematic Rate configuration field determines the rate keys are accelerated.

Î

6

(DEFAULT) 6 characters per second

Î

8

8 characters per second

Î

10

10 characters per second

Î

12

12 characters per second

Î

15

15 characters per second

Î

20

20 characters per second

 

 

 

60

 

©Copyright 2007 CyberResearch, Inc.