CyberResearch® CPU Cards

CPEx GX-333-X

4.Refresh Rate ranging from 60 to 100Hz.

5.HSYNC Polarity value to High or Low.

6.VSYNC Polarity value to High or Low.

7.SHFCLK Active Period time to Active Only or Free running.

8.LP Active Period time to Active Only or Free Running.

ÎOvercurrent Reporting [Disabled]

If set to enabled and the detected current exceeds safety thresholds, the audible alarm will be sounded.

ÎPort 4 Assignment [Host]

Factory default is Host. This is a factory reserved function.

ÎUART Port A

This item allows you to select a starting address from hex 3F8/IRQ4 to 2E8/IRQ3 for the first serial port.

ÎOnboard Audio [Enabled]

The Onboard Audio configuration option enables or disables the Realtek AC’97 CODEC onboard.

Integrated Peripherals

The Integrated Peripherals menu allows you to change the configuration option for peripheral devices.

The Integrated Peripherals menu has three options listed below:

1.

Master Drive PIO Mode

2.

Slave Drive PIO Mode

3.

IDE Primary Master UDMA

4.

IDE Primary Slave UDMA

5.

IDE DMA transfer access

6.

IDE HDD Block Mode

7.

Onboard FDC Controller

8.

Onboard Serial Port 1

9.

Onboard Serial Port 2

10.

Onboard Serial Port 3

11.

UART Mode Select

12.

Onboard Parallel Port

13.

Parallel Port Mode

Select the menu you wish to configure.

OnChip IDE Device

The OnChip IDE Device menu allows you to change the IDE device configurations. This item is always enabled.

ÎMaster/Slave Drive PIO Mode [Auto]

CyberResearch, Inc.

63

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com