CyberResearch® CPU Cards

CPEx GX-333-X

Jumper Settings

NOTE:

A jumper is a metal bridge that is used to close an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the ins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper.

Figure 3-34

Jumper

Figure 3-35 Board Version 1.10 and Version 1.11 Locations of Configuration Jumpers

JP1: CRT/Flat Panel Display Selector

Table 3-31 JP1 Pin Configuration

CyberResearch, Inc.

45

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com