CyberResearch® CPU Cards

CPEx GX-333-X

Step 2. You should then be prompted by “Data on RAID drives will be erased (Y/N)?”

Step 3. Press Y and then all existing RAID configurations will be invalidated.

WARNING!

If you delete a RAID configuration, all data previously stored on the member drives of the RAID configuration will be destroyed.

2.7Rebuild RAID Array

This function allows you to rebuild a RAID array if a member of a RAID configuration should fail. Neither RAID0 nor JBOD provides data redundancy. Therefore, this option only applies to RAID1 arrays. This item takes effect when a member of a RAID1 configuration has failed.

Step 1. To delete all existing RAID configurations, use your arrow keys to highlight and press Enter to activate this item.

Step 2. An “R” flashing character should appear at the list of existing arrays. Step 3. The source and destination drives will be displayed.

Step 4. Press Y to begin the rebuild process.

Step 5. During the rebuild process, the rebuild progress will be indicated by a status bar. Rebuild consumes considerable system resources and the time required for rebuilding a RAID array may vary depending on the size of stored data, disk drive capacity, and drive performance.

2.8Select Boot Drive

Step 1. To select a Boot drive, use your arrow keys to highlight and press Enter to activate this item.

Step 2. An “A” flashing character should appear at the Drive Selection Menu. Step 3. Press Enter or the Space key to finish the configuration.

CyberResearch, Inc.

89

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com