Cyclone MKV 2 Multimedia Adapter
Basic Setup:
To setup up your media adapter you will need to connect it to your TV set and supply power to the MKV adapter. You may also wish to connect the Cyclone MKV 2 to your surround sound system, wireless or wired network and attach an external hard drive.
First of all examine the back of your TV set and locate its AV ports. Please make sure you have the correct cables for your chosen setup.
Connecting Power:
Please ensure the power socket switch is in the off position before plugging in the power adapter to the wall.
Connect the power adapter (supplied) to the back of your Cyclone MKV 2 and plug the power into the power socket. You will notice the standby LED is now lit.
Composite Cable:
Connecting the Cyclone MKV 2 to your TV will allow you to view multimedia in standard definition.
Using the AV lead (supplied), connect the 3.5mm jack into the 3.5mm composite port on the back of the Cyclone MKV 2. On the other end of the cable plug the red, yellow and white connectors into the corresponding input ports of your TV.
Switch on your TV and select AV mode, if required.
Press the POWER button on the remote control to switch on the Cyclone MKV 2.
Page 13. Version 0.9
