Hardware Installation (Continued)
Step 5
Connect one end of the included VGA cable (15-pin HDDB Male / Male) to the female connectors on the back of the PC. Connect the other end of the cable to the rear panel of the DKVM-16. This step can be repeated for all PCs.
Back of PC
Step 6
Using the included 3-in-1 cable, locate the mouse connector (green) and con- nect one end to the PS/2 mouse port on the back panel of the computer, and the other end to the PC1 PS/2 mouse port on the back panel of the DKVM-16. If there are not enough PS/2 ports on the computer, you can choose a serial port for the mouse connection. Be sure to add a serial to PS/2 converter in- cluded with the DKVM-16before connecting the 3-in-1 cable to the computer.
Back of PC
