11
Hardware Installation (Continued)
Step 11
Now power up all computers simultaneously. The first computer will be shown
on the monitor. You may check to see if the mouse, keyboard, and monitor
work after the computer has booted up. If this is OK, use the “Select” button to
choose the next computer and verify the functionality in the same manner. If
you find errors, recheck all cables for proper connections before going to the
trouble-shooting section of this manual.
Note: Please do not switch the PC ports (i.e. do not press the “push” button of the
KVM switch or run Hot Key) while the computers are in the boot-up process. Nor-
mally, during the boot-up process, each PC will communicate with the keyboard
and mouse. If you switch PC ports on the KVM at this time, it will cause communi-
cation errors or initialization failures between the PC and keyboard or mouse.