Removal and Replacement Procedures

5.Slide and hold the battery release latch acuator 1 to the right.

6.Slide the Bluetooth module cable 2 through the hole in the battery release latch actuator.

7.Remove the Bluetooth module cable from the base enclosure clips 3 that hold it.

8.Remove the Bluetooth module cable 4.

The Bluetooth module cable is included with the Bluetooth module and is also available in the Miscellaneous Cable Kit, spare part number 403814-001.

Removing the Bluetooth Module Cable

Reverse the above procedure to install the Bluetooth module.

5–56

Maintenance and Service Guide

Page 148
Image 148
HP DV8300 manual Reverse the above procedure to install the Bluetooth module