HP DV8300 manual Removing the Fan/Heat Sink Assembly Screws, Part

Removal and Replacement Procedures

4.Remove the following screws:

3 One Phillips PM2.5×4.0 screw that secures the expansion port 2 bracket and fan/heat sink assembly to the system board

4 Two slotted M1.5×9.0 screws on each side of the expansion port 2 that secure the expansion port bracket and fan/heat sink assembly to the system board

5 Two Phillips PM3.0×7.0 screws on each side of the external monitor port that secure the fan/heat sink assembly to the system board

Removing the Fan/Heat Sink Assembly Screws, Part 2

5–66 Maintenance and Service Guide