Removal and Replacement Procedures
3.Before disconnecting the antenna cables, make note of which cable is attached to which antenna clip on the Mini Card module, and then disconnect the auxiliary and main 1 antenna cables from the Mini Card module.
4.Slide the Mini Card retainer bar 2 away from the Mini Card module. (The edge of the module opposite the socket rises away from the computer.)
5.Remove the Mini Card module by pulling the card away from the socket at an angle 3.
✎The Mini Card module is designed with a notch 4 to prevent incorrect installation.
Removing a Mini Card module
Reverse the above procedure to install a Mini Card module.
Maintenance and Service Guide |
