HP DV8300 manual Preparing the Computer for Disassembly, LED Board Keyboard Display Assembly

Removal and Replacement Procedures

Disassembly Sequence Chart (Continued)

5.12	LED Board	4
5.13	Keyboard	5
5.14	Display Assembly	6 to remove the display
		assembly
		6 to remove the display bezel
		4 to remove the display panel
		4 to remove each display
		hinge
		1 to remove the display
		inverter
5.15	Top Cover	24
5.16	System Board	8
5.17	Bluetooth Module	2
5.18	Modem Cable	0
5.19	USB Board	0
5.20	Speaker Assembly	2
5.21	Fan/Heat Sink Assembly	9
5.22	Processor	1 loosened
5.23	PC Card Assembly	2

5.3Preparing the Computer for Disassembly

Before you begin any removal or installation procedures:

1.Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power cord.

5–4 Maintenance and Service Guide