D-Link DES-2212 manual Using the Console Interface

♦Fragments Counts packets less than 64 bytes with either bad framing or an invalid CRC. These are normally the result of collisions.

♦Jabber Frames Counts frames with length more than 1518 bytes and with CRC error or misaligned (bad framing).

♦Collision Counts collisions on the Ethernet segment.

♦Late Collisions The number of collisions that occurred at or after the 64th byte (octet) in the frame.

♦Bytes Tx Counts the number of bytes successfully sent from the port.

♦Bytes Rx: Counts the number of bytes successfully received at the port. This also includes local and dropped packets.

♦Total Octs Rx: Counts the number of bytes (octets) received on the port, in both good frames and error frames.

♦Multicast Rx Frames Counts the number of good multicast frames received. This includes local and dropped multicast packets.

♦ Broadcast Rx Frames Counts the number of good broadcast frames received. This includes local and dropped broadcast packets.

♦Rx (Good) Frames Counts the number of good frames received. This also includes local and dropped packets.

♦Tx (Good) Frames Counts the number of good frames sent from the respective port.

♦64 Octs, 65-127 Octs, 128-255 Octs, 256-511 Octs, 512-1023 Octs, 1024-1518 Octs Counts frames of various length ranges, both valid and invalid.

♦Total Rx Frames Counts the number of frames received, both good frames and error.

50 Using the Console Interface