D-Link DES-2212 manual Clear-SNMP-comm-table

Enables or disables authentication failure traps for invalid SNMP community names. The argument may be enable or disable.

♦clear-SNMP-comm-table

Clears the hub’s SNMP community name table.

♦SNMP-communitycommunity permissions

Adds community to the switch’s list of SNMP communities, with access permissions. The community name can be up to 32 characters long. Permissions can be read, for read-only community access, or write, for read-write community access.

♦clear-ip-trap-manager-table

Removes all entries from the switch’s trap manager list.

♦ip-trap-manageraddress community

Adds the host at address to the switch SNMP trap manager list. Traps sent to the host will use community name community, which may be a string up to 32 characters long.

♦PFT-Entrymac-address recv-port allowed-ports

Adds entries to the switch’s forwarding table. The mac-addresscorresponds to the source Ethernet address, in the form xx:xx:xx:xx:xx:xx. The recv-portis the port from which packets from the station may be received. The allowed-portsfield lists the ports to which packets from the station may be forwarded, separated by slashes.

Boot Configuration File 67