D-Link DES-2212 system.sysName, system.sysLocation, sysContact

36
Using the Console Interface
SNMP requests, allowing these settings to be used for network management
purposes. Each of these fields can contain up to 64 characters:
♦ System Name: corresponds to the SNMP MIB II variable
system.sysName, and is used to give a name to the switch for
administrative purposes. The switch’s fully qualified domain name is
often used, provided a name has been assigned.
♦ System Location: corresponds to the SNMP MIB II variable
system.sysLocation, and is used to indicate the physical
location of the switch for administrative purposes.
♦ System Contact: corresponds to the SNMP MIB II variable
sysContact, and is used to give the name and contact information
for the person responsible for administering the switch.
Figure 6-13. System Configuration Menu
The System Configuration Menu also contains the Console/Telnet Display
Timeout parameter, which determines how long the console may sit idle
before the user is “logged out.”