Operating Your Dishwasher
Control Panel Settings
| Daily |
| Rinse and Hold |
| Menu # |
|
| Setting | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Display
Dry
Various functions and settings on your dishwasher can be configured by the user. To change one of the settings:
1.Open the door slightly. If the main power switch is on, turn it off and wait about five seconds.
2.Turn on the main power switch. Wait for the numbers to appear on the display.
3.Within five seconds of the numbers appearing on the display, hold your finger on the PROGRAM touch key. Wait for the beep confirming the key touch, then touch the Dry key at the same time. Touch both keys until the Daily and Rinse and Hold indicator lights flash.
4.While the Daily and Rinse and Hold lights are flashing, touch START/STOP repeatedly until the menu number for the desired function appears on the left side of the display.
5.Touch PROGRAM repeatedly until the desired setting for the function being set appears on the right side of the display.
6.Touch START/STOP repeatedly to save the setting and exit the menu. Repeat the above steps to change the settings for a different function.
Function | Menu # | Settings | Description | |
|
| 0 (off)/ | When the child safety lock is engaged, the control panel touch keys do | |
Child lock | 1 | not work normally, making it more difficult to program and start. See | ||
1 (on) | ||||
|
| page 3 for instructions on how to temporarily bypass the child lock. | ||
|
|
| ||
End beep | 2 | 0 (off) to 4 | Changes the volume of the beep used to indicate when a cycle is | |
volume | finished or when a fault has occurred. | |||
Key touch | 3 | 0 (off) to 4 | Changes the volume of the beep emitted each time a key on the | |
beep volume | control panel is touched. | |||
|
|
|
| |
Display | 4 | Adjusts the contrast of the display. | ||
contrast |
| |||
|
|
| ||
Rinse aid | 5 | 0 (off) to 6 | Adjusts the amount of rinse aid dispensed during each cycle. | |
dispenser |
|
|
|
12