Cleaning and Maintenance
Replacing the Light Bulbs
warning
•To prevent electrical shock and/or personal injury, make certain that the oven and light bulb(s) are cool and that power to the oven has been turned off at the main power supply before replacing the light bulb(s).
•Always make sure the lens covers are in place when using the oven. The lens covers protect the bulbs from breakage.
•Use the pry stick with caution. Do not cause uneven stress on the lens cover.
•Replacing the lens cover without lining up the
Light bulb replacement is considered to be a homeowner maintenance operation. If the lights do not work, before replacing them, please consult the Problem Solution Guide on page 30.
To replace the light bulbs, follow these steps:
1.Turn off power to the oven at the main power supply.
2.Gently insert the pointed end of the supplied lens pry stick under the center edge of the lens cover. Hold your hand under the lens for support and pry it loose. Pull the lens cover straight out.
3.Using a glove, insert the new bulb into the socket. Replace the light bulbs only with Dacor Part No. 100429, available from any authorized Dacor parts dealer.
IMPORTANT: Do not touch the replacement halogen light bulbs with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and cause it to burn out faster than normal.
4.When reinstalling the lens cover, line up the
5.Turn the power to the oven back on at the main power supply.
6.Reset the clock (see page 9).
Lens Pry Stick
Light fixture in oven wall
Light Bulb
Lens
Socket
Lens Cut Out
28
