Installation Instructions
Installing the Burner Components
WARNING
Never attempt to operate the cooktop section of the range with any of the burner rings, burner caps or grates removed.
• | Remove the burner rings, burner caps and grates from their | Spill Tray |
| shipping packages. | |
|
| |
• | Install the burners as shown. The location, type and size of | Crown Burner |
| the burners varies with the range model number. | |
• | Gently set the grates on top of the spill tray. Put the legs |
|
| of each grate inside the corresponding dimples. On model | Stack Burner |
| ER36D, the largest grate goes in the center. |
|
STEP 3: Install burner cap. Ridge on cap must surround top of ring.
Ridge on bottom of burner cap
STEP 2: Install burner ring. Line up ring tabs with head slots. Twist back and forth to assure proper seating.
STEP 1: Install burner head. Put locating tab in keyed hole.
Keyed Hole
Crown Burner Installation
Burner Ring
Burner Head
Burner Base
STEP 3: Install burner caps. Ridge on cap must surround top of ring.
STEP 2: Turn ring until it drops into place. Twist back and forth to assure proper seating.
STEP 1: Put burner ring on top of the head.
Ridge on bottom of burner cap
Burner Ring
Burner Head
Stack Burner Installation
17