Dacor ER36D-C, ER48D-C All tolerances: ±1/16” (±1.6mm), Inlet, Cover Removed, Cover Removed, Back of Range, Hole in Bottom, Gas Regulator Access, Range Electrical Access

Planning the Installation

Product Dimensions

All tolerances: ±1/16” (±1.6mm)

						Gas Regulator Access,
	GAS - ELECTRICAL ACCESS DIMENSIONS					Cover Removed
Model	A	B	C	D	E*		Range Electrical Access,
	5 5/8”	18 3/8”	10 3/4”	13 11/16”	7/8”
ER36D							Cover Removed
	(142.9mm)	(466.7mm)	(273.0mm)	(347.7mm)	(22.2mm)
ER48D	3 13/16”	18 11/16”	9 3/8”	13 3/4”	1 1/8”
	(96.8mm)	(474.7mm)	(238.1mm)	(349.3mm)	(28.6mm)	Inlet
* The diameter on models equipped for use in Canada is ¼” (6.4mm) larger							Back of Range
						B
than those stated. Canadian units come from the factory pre-wired with
an appliance cord. When installing an appliance cord on models that are
not pre-wired, the hole size must be increased to 1 1/8” (1 3/8” for model
ER48D) by removing the conduit bracket inside the range electrical access							D
box.
						A	E Electrical Connection
						C	Hole in Bottom
			48” (1219mm)

**

**

1 1/16” (27mm) to cooking surface (top of grates) from top of trim

Finished Side

Panel

Width: ER36D - 35 7/8” (911mm)

ER48D - 47 7/8” (1216mm)

**

** Optional