Care and Cleaning

Replacing the Light Bulbs

 

warning

To replace the light bulbs...

 

1.

Replace the light bulb only with Dacor part number

•

To prevent electrical shock and/or personal injury, make

 

100429. See the page 31 for ordering information.

 

certain that the oven and light bulb(s) are cool and that power

 

 

2.

Turn off power to the oven at the circuit breaker panel

 

to the oven has been turned off at the main power supply

 

before replacing the light bulb(s).

 

or fuse box.

• Always make sure the lens covers are in place when using

3.

Hold your hand under the lens for support and gently

 

the oven(s). The lens covers protect the light bulbs from

 

pry it loose using a spatula or table knife. Pull the lens

 

breakage caused by high oven temperatures or mechanical

 

cover straight out.

 

shock.

4.

Grasp the old bulb and pull it straight out of the

• Replacing the lens cover without lining up the cut-out with the

 

socket.

 

light socket will damage the light fixture.

5.

Using a glove, insert the new bulb into the socket.

•

Do not use a screwdriver to remove the lens.

6.

As you reinstall the lens cover, line up the cutout on

Light bulb replacement is considered to be a homeowner

 

the inside rim with the light socket. Gently press it

maintenance operation. If the lights do not work, before

 

into its original position.

replacing them, please consult the Problem Solution

7.

Turn the power to the oven back on at the main power

Guide on page 30.

 

supply.

 

 

 

 

important

8.

Reset the clock (see page 8).

Do not touch the replacement halogen light bulbs with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and cause it to burn out faster than normal.

Light

bulb

Light socket

Cutout on inside rim of lens

29