Dacor ro2230s Racks, To insert the standard oven racks, To remove the standard oven racks, To insert your GlideRack oven rack, To remove your GlideRack oven rack

Operating Your Oven

Racks

You may use either rack type on any level inside the oven.

warning

To reduce the chance of burns, position the oven racks when the oven is cool. If you must reposition a rack when the oven is hot, use pot holders.

To insert the standard oven racks...

1.Insert the end of the rack with the safety notches into the oven first.

2.Attach both sides of the rack to the rack supports in the oven as shown in the diagram below.

3.Begin to slide the rack in, and then, lift up so that the safety notches clear the ends of the rack supports.

4.Push the rack all the way in with both hands.

To remove the standard oven racks...

•If you want to remove an oven rack, grasp it with both hands and pull gently straight out toward you until it stops.

•To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety notches. The safety notches reduce the chances of a rack coming out of the oven accidentally.

Back of rack

Front of rack

Rack

support

Standard

Rack

Safety Slide oven rack notch supports into slots

on the rack

To insert your GlideRack oven rack...

Your oven comes with a Dacor GlideRack oven rack. You can pull the GlideRack oven rack out further than the standard racks and still support heavy pots and pans full of food. It is great for heavier foods and the optional Dacor baking stone.

1.Align both sets of safety clips (right and left) on the back of the rack guides with the oven rack supports as shown below. NOTE: The diagram below shows instal- lation with the rack guides extended but, the rack may be installed with or without the guides extended, whichever is easier.

2.Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports.

3.Push the rack all the way in.

4.Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place.

To remove your GlideRack oven rack...

•Grasp the rack with both hands and pull it gently straight out toward you until it stops.

•Lift up until the front safety clips just clear the front of the rack supports on the oven. Continue to pull out. Moving the end of the rack back and forth slightly, left to right, as you pull, will make it easier to remove.

Rack

guides

Lift front safety clips over rack supports

Front of

rack

GlideRack

Oven Rack Back of

guide

Oven rack

support

Slide oven rack supports between back safety clips

9