Daewoo DAC-100 Normal Operation, Channel Selection, Volume Adjustment, Mute on the Remote Control

NORMAL OPERATION

Channel Selection

You can select channels as described below.

Number and – (dash) buttons (on the Remote Control)

Use Number (0-9) and – (dash) buttons to select a channel directly.

[CH +/–] buttons (on the Remote Control) or [É ] (on the front panel)

Use [CH +/–] on the Remote Control or [É ] on the front panel to cycle the Converter Box through the channels in memory.

Volume Adjustment

Adjusts the sound level for analog audio out on the HDTV Receiver. You must set Audio Variable to On in the OPTION menu to use the Volume Adjustment.

[VOL +/–] buttons (on the Remote Control) or [Ï Ã] (on the front panel)

Use [VOL +/–] on the Remote Control or [Ï Ã] on the front panel to adjust the sound level for analog audio out on the Converter Box.

MUTE (on the Remote Control)

Press [MUTE] to turn off the volume for audio out on the Converter Box.

Notes

Before setting Audio Variable to Off, make sure that you have turned down the TV’s volume to the minimum. Otherwise, sudden high volume sound may cause hearing or speaker damage.

BASIC OPERATION

33