Recording from an External Input
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs.
1Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 11 and 14.
2Use [ …†] or [INPUT] to select the external input to record from.
3Load a recordable disc or tape.
4Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), SEP (Very Low Quality - 8 hrs/disc)
VCR: SP (Standard Play), LP (Long Play - 2 times SP)
5Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display. Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 38.
6Press [STOP (■)] to stop recording.
Note
If your source is
44
