Initial Setup
‘Preferences’ / Audio Settings
1Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
2Use [œ/√] to select ‘Preferences 
‘.
3While ‘Preferences 
‘ is selected, press [†] to select ‘Audio‘.
4Press [√]. The ‘Audio‘ submenu is displayed.
Preferences |
|
| |
Video |
| Digital Output | BItstream |
•Audio |
| ||
Parental Ctrl | Dynamic Range |
| |
Auto Settings |
|
| |
VCR |
|
|
|
Modulator Out |
|
| |
… | Choose | ENTER OK | SETUP Exit |
œ √ † | |||
Digital Output
1Use […/†] to select ‘Digital Output‘ while the Audio submenu is displayed.
2Press [√] to go to the second level.
3Use […/†] to select the desired digital output type.
4Press [ENTER] to confirm your selection.
5Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
Bitstream
Preferences |
|
| ||
Video |
|
|
|
|
Audio |
|
| • Digital Output | Off |
Parental Ctrl |
| Dynamic Range | Bitstream | |
Auto Settings |
| LPCM | ||
VCR |
|
|
|
|
Modulator Out |
|
| ||
… | Choose | ENTER OK | SETUP Exit | |
œ √ † | ||||
SETUP
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder).
LPCM
Select when connected to a digital amplifier. The DVD Recorder+VCR's digital audio signal will be output in the PCM format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest passages). This allows you to listen to a movie at a lower volume without losing clarity of sound.
Set 'Dynamic Range'to anymode you want for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.
Preferences |
|
|
|
Video | Digital Output |
|
|
Audio |
|
| |
Parental Ctrl | Dynamic Range | – | – FULL |
Auto Settings |
| – | – |
VCR |
| – | – 1/2 |
Modulator Out |
| – | – |
|
| – | – OFF |
… | ENTER OK | SETUP Exit | |
œ √ † Choose | |||
23
