Auto :

Convert to the appropriate aspect ratio
automatically.

TV Aspect Ratio

1
Use […/†] to select ‘TV Aspect‘ while the
‘Video‘ submenu is displayed.
2
Press [ENTER] or [√] to go to the second level.
3
Use […/†] to select the desired ‘TV Aspect’.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.

4:3 LB :

Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.

4:3 PS :

Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.

16:9 :

Select when a 16:9 wide screen TV is
connected.

Video Output

Progressive Scan Video provides the highest picture
quality with reduced flickering.

RGB :

If you connect the HDD/DVD Recorder to an
analog television using the SCART jacks, set Video
Output to ‘RGB’.

Interlace or Progressive :

If you connect the
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
Follow the same procedure as ‘TV Aspect Ratio’ to
change the ‘Video Output’.
Caution
• Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
Video
TV Aspect Auto
Video Output Interlace
Instructions:
Enter-Confirm Setup-Exit Move …†
Select Picture
Format
4:3 LB
4:3 PS
16:9
Auto
Video
TV Aspect Auto
Video Output Interlace
Instructions:
Enter-Confirm Setup-Exit Move …†
Select Video
Output
Interlace
Progressive
RGB
1
Press [SETUP].
2
Use [œ/√] to select ‘Preferences‘.
3
While ‘Preferences‘ is selected, press [†] to
select ‘Video‘.
4
Press [ENTER]. The ‘Video‘ submenu is
displayed.
PREFERENCES / Video Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move …†
24
Setup menu
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 24 mac001 1200DPI 100LPI