Daewoo DHR-9105P user manual Moisture Condensation, Moisture condensation can occur

DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 60 mac001 1200DPI 100LPI

Troubleshooting

Symptom Cause Solution

Cannot record or did not	The remaining blank space on the
record successfully.	disc is insufficient.
	The source you are trying to record is
	copy-protected.
	When setting the recording channel,
	the channel is tuned on your TV’s
Timer Recording not	tuner.
	Clock in HDD/DVD Recorder is not set
possible.	to correct time.
	Timer has been programmed
	incorrectly.
	TIMER indicator light does not appear
Stereo Audio Record	after programming timer.
	TV is not Stereo-compatible.
and/or Playback not	Broadcast program is not in stereo
present.	format.
	HDD/DVD Recorder A/V Out jacks are
	not connected to TV A/V In jacks.
	HDD/DVD Recorder Audio/Video Out is
	not selected for viewing at the TV.
	HDD/DVD Recorder’s TV audio
	channel is set to BIL or MONO.
Remote control does not	The remote control is not pointed at
	the remote sensor of the HDD/DVD
work properly.	Recorder.
	The remote control is too far from the
	HDD/DVD Recorder.
	There is an obstacle in the path of the
	remote control and the HDD/DVD
	Recorder.
	The batteries in the remote control are
	dead.

Use another disc.

You cannot record the source.

Select the channel on the HDD/DVD Recorder’s built-in TV tuner.

Set clock to correct time. See ‘Set Clock‘ on page 21.

Reprogram Timer. See ‘Timer Recording‘ on page 42~44.

Reprogram Timer.

No solution.

No solution.

Make A/V connections. Stereo is available only via A/V output from HDD/DVD Recorder.

Select AUX or A/V source as TV input. Set TV audio channel mode to Stereo.

See ‘Changing the TV Audio Channel‘ on page 33.

Point the remote control at the remote sensor of the HDD/DVD Recorder.

Operate the remote control within 23 ft (7m).

Remove the obstacle.

Replace the batteries.

RESET : If the set is in malfunctions, press [DVD/HDD] key on the front panel for 5 seconds or unplug the power cord, and then plug it in after 5 seconds. As this set is a Digital Multimedia Product, malfunction may occur.

Moisture Condensation

Moisture condensation can occur: In locations where moisture condensation may occur:

When the HDD/DVD Recorder is moved from a cold place to a warm place.

Under extremely humid conditions.

Keep the HDD/DVD Recorder plugged into an AC power outlet with the power on. This will help prevent condensation.

When condensation has occurred, wait a few hours for the HDD/DVD Recorder to dry before using it.

60