HOW TO SET THE OVEN CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the display shows “:0” when the power comes back on.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2.Touch CLOCK pad once more. This is a 24 hour clock system.
3.Enter the correct time of day by touching the numbers in sequence.
4.Touch CLOCK pad.
<The display stops blinking, and the colon starts blinking. If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59>
NOTE: If you attempt to enter an incorrect time, the time will not be set and it will return to previous status. Touch the CLOCK pad and
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating defrost and stand times by cycling on and off.
1. Touch DEF. pad.
<The DEFROST indicator light and “:0” is displayed>
2.Touch number pads for the desired defrosting time.
<The display will show what you touched>
3.Touch START pad.
Note : Your oven can be programmed for
59 minutes 99 seconds(59 : 99)
When you touch START pad, the DEFROST indicator starts blinking to show the oven is in the DEFROST mode. The display counts down the time to show you how much defrosting time is left in the DEFROST mode. Halfway through defrosting time, turn over, break apart and. or redistribute the food. When the defrosting time ends, END indicator will blink.
COOKING IN ONE STAGE
1.Touch POWER pad. (Select the desired power level.)
<The M/W indicator lights. The display will show what you touched>
2.Touch number pads for the cooking time. <The display will show what you touched>
3.Touch START pad.
Note : Your oven can be programmed for
59 minutes 99 seconds. (59 : 99) Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and slow cooking of meats.
When you touch START pad, the M/W indicator starts blinking to show the oven is cooking. The display counts down the time to show how much cooking time is left. When the cooking time ends, END indicator will blink.
