Manuals / Daewoo / Kitchen Appliance / Microwave Oven

Daewoo KOR-6Q2B5S To remove door parts, Ref No, Part Code, Part Name, Description, Q’Ty, Remark

Models: KOR-6Q2B5S

1 33

Page 12

✔Caution : In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).

3.To remove door parts.

REF NO.	PART CODE	PART NAME	DESCRIPTION	Q’TY	REMARK

A01	3512206440	FRAME DOOR	HIPS	1

A02	3517007300	BARRIER-SCREEN*0	PET T0.125	1

A03	3515204100	STOPPER SINGE *T AS	KOR-63150S	1

A04	3511719500	DOOR PAINTING AS	KOR-6C0B5S	1

A05	3517002800	BARRIER-SCREEN *I	T0.1	1

A06	3512300210	GASKET DOOR	PP	1

A07	3513100730	HOOK	POM BLACK	1

A08	3515101320	SPRING HOOK	HSW-3	1

(1)Remove the gasket door from door weld as.

(2)Remove the door frame from door weld as.

(3)Remove the stopper hinge top from door weld as.

(4)Remove the spring and the hook.

(5)Remove the barrier screen outer from door frame.

(6)Reverse the above steps for reassembly.

Page 12

Image 12

Daewoo KOR-6Q2B5S service manual To remove door parts, Ref No, Part Code, Part Name, Description, Q’Ty, Remark

Contents

Microwave Oven Model KOR-6Q2B5SDAEWOO ELECTRONICS CORP http //svc.dwe.co.krTABLE OF CONTENTS SAFETY AND PRECAUTIONS 2. FOR SAFE SERVICE PROCEDURES1. FOR SAFE OPERATION SPECIFICATIONS KOR-6Q2B5SSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 1. OUTER DIMENSION EXTERNAL VIEW2. FEATURE DIAGRAM 6 SAFETY INTERLOCK SYSTEM 7 CONTROL PANEL9 OVEN FRONT PLATE 3. CONTROL PANEL INSTALLATION 5. Power supply7. Do not operate the oven if it is colder than room temperature EARTHING INSTRUCTIONSWattage output chart Touch POWER padPower levelDisplay OPERATIONS AND FUNCTIONSDISASSEMBLY AND ASSEMBLY Cautions to be observed when troubleshooting2. To remove door assembly 1. To remove cabinet2 Remove the door assembly from top plate of cavity 3 Reverse the above for reassembly3. To remove door parts REF NOPART CODE PART NAME1 To reduce gap located on part ‘A’ 5. To remove control panel parts REF NOPART CODE PART NAMEHigh voltage circuit wiring 7. To remove magnetron 6. To remove high voltage capacitor8. To remove wind guide assembly 9. To remove H.V.transformerINTERLOCK MECHANISM AND ADJUSTMENT ADJUSTMENTTROUBLESHOOTING GUIDE Approxblows plied to RELAY RY2 coil TROUBLE 3 No microwave oscillation even though fan motor rotates not show of control circuitkeyboard for the following key 1. MEASUREMENT OF THE MICROWAVE POWER OUTPUT PROCEDUREMEASUREMENT AND TEST PROCEDURES 2. MICROWAVE RADIATION TEST3. COMPONENT TEST PROCEDURE 1. High voltage transformer2. High voltage capacitor 3. High voltage diodeWIRING DIAGRAM 1. CIRCUIT CHECK PROCEDURE PRINTED CIRCUIT BOARD1. Low Voltage Transformer check 2. Voltage checkMeasure Point MP1 MP1 GND3. When there is no microwave oscillation 5. When the digital clock does not operate properlySTATE POINT2. PCB CIRCUIT DIAGRAM SYMBOL SPECIFICATION3. PCB LOCATION NO NAMEEXPLODED VIEW AND PARTS LIST 1. DOOR ASSEMBLYRefer to Disassembly and assembly 3. TOTAL ASSEMBLYPART CODE PART NAMEDESCRIPTION DAEWOO ELECTRONICS CORP S/M NO. R6Q2B5S001PRINTED DATE Jul 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA

3.To remove door parts.

REF NO.

PART CODE

PART NAME

DESCRIPTION

Q’TY

REMARK