Dakota Digital CMX operation manual Saving a Setup

Dakota Ultrasonics

4)Use the UP and DOWN arrow keys to scroll through the setups until the target setup is highlighted.

5)Press the ENTER key to activate the confirmation screen.

6)Press the OK key to load the setup from memory.

7)Press the MEAS key to return to the measure screen.

11.3 Saving a Setup

Once the CMX parameters and features have be adjusted for an application, the user may elect to save these setting to a specific setup location for future use. This can potentially save time and reduce error between users.

It is sometimes necessary to rename a previously saved setup, or add additional comments about a particular setup. The setup name may have been entered incorrectly, or the user needs to use the setup for a completely different project. An inspector’s name or other comments about the project may also be required for additional documentation purposes. The following procedures outline the necessary steps for saving and editing a setup:

88