Dakota Digital MMX-6 operation manual Using the Data Logger

MMX-6 DL Ultrasonic Thickness Gauge

Using the Data Logger (con't)

•The current file will be diplayed ( F-01, F-03, etc. )

4)Press the UP / DOWN arrow keys to scroll to the file ( 1-10 ) that will be used to record the measurements.

5)Press the SEND key once again to select the file.

Note:

•The display will flash the FILE / F-04( The selected file )symbol.

6)Press the MEM key, once again, to advance to the storage locations in the file selected.

Note:

•The display will flash the current storage location ( L007, L039, etc. ), followed by the status of the location. The storage location can contain one of three possible things: a) a measurement that was previously stored. b) A clear location, indicated by the CLr symbol. c) Obstruct ( ObSt ), indicating that a measurement could not be obtained.

7)Press the UP / DOWN arrow keys to advance to the desired cell location.

8)Take a measurement and press the SEND key to store a reading in the desired location.

Note:

•The data logger will automatically advance to the next storage location in sequential order.

9) Repeat step 8 as required.

29