MMX-6 DL Ultrasonic Thickness Gauge
The UP arrow key has three functions. When the MMX-6 DL is in calibration mode, this key is used to increase numeric values on the display. An auto-repeat function is built in, so that when the key is held down, numeric values will increment at an increasing rate. When MODE is activated, the UP arrow key scrolls through the various features and settings of the MMX-6 DL. When the data logging feature has been activated by pressing the MEM key, the UP arrow is used to scroll through the various files, storage locations, and functions of the data logger. Refer to page 28 for further information regarding the use of the UP arrow key and the data logger.
The DOWN arrow key has three functions. When the MMX-6 DL is in the CAL mode, this key is used to decrease numeric values on the display. An auto-repeat function is built in, so that when the key is held down, numeric values will decrement at an increasing rate. When MODE is activated, the DOWN arrow scrolls through the various features and settings of the MMX-6 DL. When the data logging feature has been activated by pressing the MEM key, the UP arrow is used to scroll through the various files, storage locations, and functions of the data logger. Refer to page 28 for further information regarding the use of the DOWN arrow key and the data logger.
