![](/images/new-backgrounds/1255607/25560769x1.webp)
MMX-6 DL Ultrasonic Thickness Gauge
Clearing an Entire File
The user may require the contents of an entire file be completely cleared of all measurements. This would allow the user to start a new list of measurements starting at storage location L001. The procedure is outlined in the following steps:
1)Press the ON/OFF key to power up the
2)Press the MEM key to activate the data logging functions and settings.
3)Press the SEND key to enter file setup.
4)Press the UP / DOWN arrow keys to scroll to the file that will be cleared of all measurements.
5)Press the SEND key once again to select the file.
Note:
The display will flash the FILE /
6)Press the UP / DOWN arrow keys to scroll to the flashing CLr / F- 05 ( The file selected by the user ) symbol.
7)Press the SEND key to select the clear file option. The symbol ( CLr? ) will be displayed.
8)Press the CLR key to confirm and clear the contents of the entire file.
9)Press the MEM key, at any time, to exit the data logging functions and return to measurement mode.
31