CONNECTING THE BEVERAGE DISPENSER
Preparing The Container
USING THE WHITE ADAPTER (continued)
CONNECTING THE CONTAINER TO THE
BEVERAGE DISPENSER
6.Insert the container into the center of the unit.
7.Attach the
8.Attach the DISPENSING TUBE to the “DRINK OUT” valve in the WHITE ADAPTER
(See Figure 15).
9.Make sure there are no kinks in the TUBES. There needs to be an even flow from the unit to the container and an even liquid flow from the container to the tap.
Also, make sure the container is centered in the cooling compartment of the unit. This ensures even cooling throughout.
DRINK OUT
B
E A
V I
OE R
UR I
TA N
G
E
AIR IN
Figure 15
TURN ON THE AIR PRESSURE
10.Turn on the air pressure by moving the switch to the ON position (See Figure 16).
CLOSE THE LID
To turn on the power, please refer to “Switching on the Power” on page 15.
Air | Air |
n
AIR ON/OFF SWITCH
Figure 16
14