Danby DCAP 12030 External Water Tank Instructions contd, See, Internal Water Tank Safety Feature

External Water Tank Instructions (cont'd)

3.Position the external water tank on the support tray, making sure the quick connect on the water tank is aligned with the quick connect at the back of the cabinet.

See Fig.37

Fig.37

4.To make the connection, simply "push" the water tank quick connect into the cabinet quick connect. You will hear a positive "click" when the connection is made.

5.Install both covers on the water tank.

6.To release (disconnect) the external water tank, push the (silver) "release" button located on the cabinet quick connect, grasp the recessed handles on each side of the tank and remove.

. See fig.38, 39

Fig.38

Fig.39

CAUTION

Always empty both water tanks before attempting to move or re-locate the unit to another location.

Internal Water Tank Safety Feature

This unit is equipped with a fail-safe switch mechanism which prevents the unit from condensing water in the event the water tank is accidentally displaced and/or when the water tank is full. If this situation occurs, the unit will signal (BEEP) for 20 seconds, the bucket icon in the display will flash continuously and the (RED) WATER FULL indicator light will illuminate. This condition will remain steady until the water tank is re-positioned and/or emptied.

NOTE: The fan motor will continue to operate under this condition. This is normal, but no cooling or dehumidifying will occur until the internal tank is emptied and/or re-positioned. (NOTE: It may take several minutes before the compressor resumes normal operation)

Make sure the Internal Water Tank is correctly positioned inside the cabinet otherwise the unit will not operate. Fig. 40.

Fig. 40

6