Danby DPAC9030, DCAP 12030 manual Remote Control Operating Instructions cont’d

Remote Control Operating

Instructions (cont’d)

6.Swing: Press the “Swing” button to activate the automatic air swing (oscillation) feature. The

symbol " "will appear in the display window confirming the "swing" feature is activated. To deactivate the “swing” feature, press the swing button again.

7.RE-SET:Press the “re-set”button to cancel all remote control programs. This will erase “all” information contained within the remote control display window (including time of day clock setting).

8.+ - C & F: Press either of the temperature buttons to select (incresae / decrease) operating temperatures. Press both button simultaneously to switch from “Celsius” to “Fahrenheit”.

9.SLEEP: NOTE: The sleep mode feature can only be programmed using the hand held remote control.

The sleep mode allows you to program a set cooling temperature that will gradually increase the set operating temperature “+0.5ºC / 0.9º F” (during night time sleeping hours) resulting in less compressor running time saving energy consumption and preventing the room from becoming to cold during sleeping hours. See the table below for temperature differentials during an 8 hour period.

EXAMPLE:
Time Period (Operation)	Temperature Increase
(Above Set Temperature)
1st Hour	+0.5ºC
2nd Hour	+0.5ºC
3rd Hour	+0.5ºC
4th Hour	+0.5ºC
5th Hour	+0.5ºC
6th Hour	+0.5ºC
7th Hour	+0.5ºC
8th Hour	Automatically returns to

Set Operating Temperature

1)Press the sleep button on the remote control.

2)The set temperature will appear in the display window of the remote.

LCD Window
3	5
	4
6	8
	9
2

3)Press the temperature buttons to select the required “set” operating temperature.

4)The unit is now programmed for sleep mode

NOTE: When turning off the main unit with the remote control, there may be a delayed (off) reaction (5-15 seconds) before the unit actually stops. This is normal.

19