Key Pad Functions Fig. 5
The control panel on this unit “illuminates” automatically when any key pad is depressed. This “illumination” feature will
I/O: Power Switch On / Off.
Indicator Lights:
RUN:
Blue Light illuminates to indicate selected mode is operational.
Water Full Indicator Light:
Red Light illuminates indicating the internal water tank (only) is full and/or incorrectly positioned inside
the cabinet. Fig. 6.
FAN: Selects optional fan speeds.
Fan Speed Options:
Cooling Mode: Low-Medium-High-Auto
Dry - Dehumidifying Mode: Low. (only)
Fan Mode: Low-Medium-High
CLOCK: Allows you to initiate and/or change the TIME OF DAY setting. To activate clock mode both the TIMER ON and TIMER OFF buttons must be pressed simultaneously.
TIMER ON: Used to initiate the AUTO ON start time
TIMER OFF:Used to initiate the AUTO OFF stop time
|
|
| RUN | WATER FULL |
|
I/O | MODE | FAN | SWING |
| TIMER ON TIMER OFF |
|
|
|
| TEMP/TIMER | CLOCK |
|
|
|
| ADJ | |
|
|
|
|
| |
|
|
|
|
| Fig. 5 |
Temp/Timer Adj:
:Used to adjust Time of Day Clock settings forward (1 min./1hr. increments).
Used to adjust Temperature settings forward (1°C increments).
Used to adjust Temperature settings forward (1°F increments).
Used to adjust
A warning signal (beep) will sound for 20
WATER FULL seconds and the Water Full indicator light will illuminate.
TEMP/
AD
Fig. 6
: Used to adjust Time of Day Clock settings backward (1 min/1hr. increments).
Used to adjust Temperature settings backward (1°C increments).
Used to adjust Temperature settings backward (1°F increments).
Used to adjust Timer
SWING: Allows the vertical louver grills to oscillate from side to side automatically.
Temperature Conversion Chart
°C | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |
°F | 50 | 52 | 54 | 55 | 57 | 59 | 61 | 63 | 64 | 66 | 68 | 70 |
|
|
|
|
|
|
|
|
|
|
|
|
|
°C | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 |
°F | 72 | 73 | 75 | 77 | 79 | 81 | 82 | 84 | 86 | 88 | 90 | 91 |
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: This appliance provides a feature that will allow you the option of setting “temperatures” in “Celsius” or “Fahrenheit”. To change the temperature display on the main unit, press both the (Temp/Timer ADJ) keypads “simultaneously” to alternate between the C & F scale
Celisus scale allows adjustments in increments of 1˚C Farenheight scale allows adjustments in increments of 1˚F
8