Chapter 3: Basic Setup
B. Dismount
3.45. Confirm NDAS device in Device Manager
1)Use “ Remove NDAS SCSI Controller safely……” as in the figure below.
Or, by clicking the NDAS icon, select “Dismount” option.
2) Click [yes] to dismount your device.
You can check to see if your NDAS device has been installed in “Disk Drive” and “SCSI and RAID controller” under Device Manager.
3) After dismounting, you can see the current status as shown in the figure.
In the case that you receive a message saying that the device can not be removed, check if NDAS window is open, or whether NDAS is still operating.
(e.g. transfer, play, remove files)
When the operation of NDAS is completely finished, try dismounting again.
26
