Datalogic Scanning 5500 manual Configuration Settings, Audio

Configuration Settings

Configuration Settings

See Configuration Examples on page 12 for samples of optimized settings for different usages. Refer to the Falcon 4400 Series PRG for information about setting other configuration items.

Audio

1.Go to Start > Settings > Control Panel. Double-tap the Decoding icon.

2.Select Configure > General > Audio.

3.Choose from the following options:

•Volume: Move the slider to raise or lower the audio volume.

•Beep Type

—Good Read selects the tone (pitch), duration and number of

beeps which are played at the end of a successful RFID painting oper- ation.

—RFID Tag Read selects the pitch and duration of the beep which is played each time one or more tags are read. It can also be disabled, so that only the green LED turns on when new tags are read.

Other options for Beep Type are RFID Tag Write or RFID Failed Write.

8 Falcon® 5500 RFID Mobile Hybrid Computer