Datalogic Scanning 5500 manual Getting Started, Introduction, Enabling Rfid

Getting Started

Introduction

The Falcon 5500 is a Falcon 4420 Windows® CE Color Mobile Computer mounted with a special RFID unit. See the Falcon 4400 Series Quick Reference Guide (QRG) and the Falcon 4400 Series Product Reference Guide (PRG) on the Product CD included with your unit for information not discussed in this RFID Addendum.

Information about the symbols and formatting used in this manual are described in the Falcon 4400 Series PRG.

Getting Started

You must charge the Falcon in the RFID-compatible dock prior to first use. The initial charge time is approximately 24 hours. See “Charging the Batteries” in the Falcon 4400 Series Quick Reference Guide (QRG) for more information.

CAUTION

Enabling RFID

Before using your PSC RFID Tag Reader, you must enable the unit for RFID.

1.Power on the unit. Follow the on-screen instructions to calibrate the touchscreen. See the Falcon 4400 Series PRG for more information.

2.Go to Start > Settings > Control Panel. Double-tap the Decoding icon.

3.Select Configure > General > Trigger Options.

2 Falcon® 5500 RFID Mobile Hybrid Computer