POWERSCAN® D8530

8.1INDICATORS

8.1.1PowerScan® D8530 LED Indicators

The PowerScan® D8530 family uses green LED indicators to signal the following reader functions:

STATUS

BEHAVIOR

Power ON

At power-on, the LEDs blink briefly,

 

then light up for 2 seconds to signal

 

the power supply is present.

Normal Function

The LED lights up after a good

 

decoding and will switch off only at

 

the next trigger press.

8.1.2Beeper

The PowerScan® D8530 basic software provides beeper signals for good/wrong reading and for indicating errors. Its tone, volume and duration can be directly configured by using the codes given in the PowerScan® D8530 Reference Manual available on the website.

The application program can also manage the beeper (User Defined Beeper) when the reader is controlled by a Host PC. It is possible to activate the beeper by sending a command from the Host to the reader via the current communication interface.

8.1.3Good Read Spot

A green Good-Read Spot will be projected in the field of view when the reading is successful.

120